Skip to content
FMX EPOS
Download
Help Centre home

Configure printing and print design

Store-wide printing is set up under Back Office → Printing and Print Design, with an active administrator account. Each terminal chooses its own receipt printer, label printer and cash drawer under Local Settings → Printers (see Configure a terminal, printers, cash drawer and card terminal).

  1. Install a Windows printer on the terminal, or add a supported TCP/IP ESC/POS printer under Local Settings → Printers.
  2. On that terminal, open Printing → Terminal Printers and select Refresh. The page says how many printers were published for this terminal, for example “3 printers published for this terminal.”
  3. Find the printer under its terminal.
  4. Choose Receipt, Label or Not Used in the list beside it.
  5. If a kitchen station already uses the printer, the page asks first. Select Change Type to go ahead, or Keep Type.

Illustration, not a screenshot. The real screen can differ with the theme or version.

While FMX EPOS is running, each terminal also re-reads its Windows printers about every five minutes, so a printer installed on another till appears under that till without anyone visiting it. Each terminal card shows Online or Offline, and each printer shows Available or Unavailable and which kitchen stations use it (“Used by Grill”). A terminal’s own receipt and label printer choices are not listed here.

New printers start as Not Used. Receipt printers also print kitchen tickets, card and refund slips, pre-bills and reports. A TCP/IP ESC/POS printer cannot be set to Label.

  1. Open Printing → Print Rules.
  2. For Eat In, Takeaway, Collection and Delivery, tick whether FMX EPOS prints a Kitchen Ticket, Labels and a Receipt automatically.
  3. Choose Receipt After Payment: Print Automatically, Do Not Print or Ask After Each Payment.
  4. Under Restaurant & Kitchen, set Pre-Bill Copies (1 to 5) and tick Print a Receipt When a Table Saves a Part Payment if needed.
  5. Under X/Z Reports, tick Print X Reports Automatically and Print Z Reports Automatically as needed.
  6. Select Save Print Rules.

Illustration, not a screenshot. The real screen can differ with the theme or version.

Receipt After Payment is one setting for every terminal. It covers counter sales, saved-order and table payments, part payments, payments recorded from Payment Review and membership fees. With Ask After Each Payment, the till asks Print receipt? after the payment is saved, and No Receipt skips it. The receipt prints only when the order type’s Receipt box is ticked. Reprint Receipt is always available. The setting does not change kitchen tickets, pre-bills, card and refund slips or X/Z reports.

Automatic X and Z printing also needs Print X/Z Reports Automatically, under Local Settings → Printers, on the terminal that runs the report. It is ticked by default. Online platform orders follow each connection’s own copy and label settings.

Table kitchen tickets print when staff select Send on the table. Kitchen tickets and labels for takeaway, collection and delivery orders print when the order is released to the kitchen (see below), never while it is held.

Receipts show VAT with one row per rate. While VAT Registered is off in System Settings → Shop Details, new orders carry no VAT and their receipts show no VAT summary or VAT number. A membership fee prints on the receipt template, with the plan, period and its own VAT summary.

The Kitchen Release section of Print Rules decides when a takeaway, collection or delivery order reaches the kitchen: its card on the kitchen screen, its kitchen tickets and its automatic labels. Each order source has its own choice:

  • Platform Collection, Platform Delivery and Platform Courier. Platform Courier is for connections where only the platform’s couriers deliver; a connection with both its own and the platform’s delivery uses Platform Delivery.
  • Website Collection and Website Delivery.
  • Scheduled Till Takeaway, Scheduled Till Collection and Scheduled Till Delivery. The takeaway rule applies only when an order time was chosen for the takeaway; an ASAP takeaway always goes to the kitchen at once.

A new store starts with Scheduled Till Takeaway and the platform and website sources on Before Due with 20 minutes, and Scheduled Till Collection and Scheduled Till Delivery on Automatic.

  1. Open Printing → Print Rules and go to Kitchen Release.
  2. For each source, choose:
    • Automatic: the order goes to the kitchen straight away.
    • Before Due: the order goes to the kitchen the set number of minutes before its scheduled time. An ASAP order still goes straight away.
    • Manual: the order waits until staff send it from the till’s Orders → Kitchen Release.
  3. For Before Due, enter the minutes (0 to 1440) in the source’s own Lead Time box beside it, for example Platform Delivery Lead Time. The box can be changed only while Before Due is chosen.
  4. Select Save Print Rules.

Illustration, not a screenshot. The real screen can differ with the theme or version.

Orders not covered by these choices, such as an ordinary counter takeaway, go to the kitchen as soon as they are paid or saved unpaid. Each order is released once, so an order paid in two parts, or saved unpaid and paid later, prints one kitchen ticket. Orders waiting for release appear under Upcoming on the kitchen screen with their due time. The Integration Host (the till that receives online orders) sends them when they are due, so keep it running during service.

Open Printing → Print Queue. The number on the tab is how many jobs have not finished yet. Pending lists those jobs (waiting, printing, failed or needing a check), oldest first, so the job holding up a printer is always on the list. When there are more jobs than the list holds, it says “Showing the oldest n of m jobs.” History lists printed and cancelled jobs for the number of days in History Retention (Days), which appears with it; change the number and select Save to keep a different period. A failed job stays under Pending until someone retries or cancels it, or until it is older than that period. The list adds new jobs by itself, and Refresh reloads it at once.

When Windows reports that a printer is offline, paused or out of paper, the terminal keeps retrying the job. Whether Windows can see the problem depends on the printer’s driver. A network ESC/POS printer is retried only when FMX EPOS cannot connect to it: once the printer accepts the job, the job shows as printed even if the paper had run out or the cover was open. Check what actually came out, and reprint it if needed.

A job still unprinted 30 minutes after it was due fails with “Not printed: waited more than 30 minutes.”, so an old ticket never prints long after the order. The 30 minutes start again when someone retries or redirects the job.

Each row shows when the job was created, what it is (for example Takeaway Kitchen Ticket with its order or table), the terminal and printer it is for, its status and number of attempts, and the last error.

  1. Select View Content to see which job it is.
  2. Check the printer itself and its Windows print queue before doing anything else.
  3. Select Retry to print the job again. If an earlier attempt may already have printed, FMX EPOS asks you to check first; select Checked, Retry only if a second copy is acceptable, or Keep Job.
  4. If several jobs failed on the same printer, Retry All (with the number of jobs) retries them all, oldest first, including any not shown in the list.
  5. Use Send Elsewhere to send the job to another registered printer of the right type. In Send Print Job Elsewhere, choose the printer and select Print. If the job may already have printed, check the printer first: the button then reads Checked, Print.
  6. Use Cancel when FMX EPOS should stop trying, and confirm Cancel Job. It cannot stop a job already passed to Windows or the printer.

Illustration, not a screenshot. The real screen can differ with the theme or version.

When several unfinished jobs wait for the same printer, the row also offers Send All Elsewhere and Cancel All with the number of jobs. Send All Elsewhere sends every unfinished job on that printer to the printer you choose, oldest first, when you select Print All. If some jobs may already have printed, they stay where they are and the button reads Print Unprinted Only. Tick “I checked the printer and Windows queue. Send these jobs too.” to send them as well; the button then reads Checked, Print All.

Check Printer means FMX EPOS does not know whether the job printed. It is never retried automatically, and it holds up that printer’s later jobs until someone checks it. Cancel All at the top of the list cancels queued jobs on every terminal, including jobs not currently shown, but cannot stop jobs that are printing or already sent. The till also shows a printer banner when a job for its printers needs attention.

  1. Open Print Design.
  2. Choose a tab: Receipts, Takeaway Kitchen Tickets, Table Kitchen Tickets, Platform Cancellation Slips, Pre-Bills, X/Z Reports, Card Slips, Booking Lists or Labels.
  3. Under Templates, select New Template, or open an existing template and select Duplicate at the top of the page. A new template starts from the built-in layout.
  4. Enter the Template Name.
  5. For roll paper, choose 80 mm or 58 mm in Paper Width and set the Left Margin and Right Margin. For a label, set the Width, Height and all four margins in millimetres.
  6. Under Add Content, choose a field and select Add.
  7. Select a block in the preview to change its text, font, alignment and other properties. On roll paper, Move Up and Move Down change the block order.
  8. Choose a suitable printer in the list beside Test Print, then select Test Print.
  9. Select Save Template.

Illustration, not a screenshot. The real screen can differ with the theme or version.

If the open template has unsaved changes and you open another template, a new template, another tab or another Back Office page, FMX EPOS asks first. Select Keep Editing to go back, or Discard Changes. To delete a saved template, open it and select Delete, then Delete Template.

The editor offers only the fields that suit the chosen output, and a template needs at least one block. Receipt blocks print in the block order; label fields are placed by position and size in millimetres. Card slips mask the card number. The built-in pre-bill layout starts with a PRE-BILL: NOT A RECEIPT line; keep it in your own pre-bill templates so guests do not mistake the pre-bill for a receipt. Keep the Copy Marker block in your own table kitchen ticket templates too: a copy printed with Print Copy is marked “COPY” only if the template has it.

Every template except labels can have one Receipt Logo block.

  1. Under Add Content, choose Receipt Logo and select Add.
  2. Under Logo Image, upload a PNG, JPEG or WebP image of up to 2 MB. The panel shows “Image ready. Save Template to apply.”
  3. Set its Maximum Width, its Alignment and its place in the block order.
  4. Select Save Template.

Illustration, not a screenshot. The real screen can differ with the theme or version.

The logo prints in black and white, with transparent areas white. It keeps its proportions and prints no taller than 40 mm. Adding the field again selects the existing logo block. To change the image, upload a new one in the same properties panel; to remove the logo, select Remove Block and save. The logo is separate from the till icon under Till Branding.

  • Receipt, card slip, pre-bill, X/Z and booking list templates are chosen for each terminal under Local Settings → Printers. Membership fee receipts use the receipt template.
  • Table kitchen ticket, takeaway kitchen ticket, platform cancellation and label templates are chosen for each station under Printing → Kitchen Stations.
  • A platform cancellation copy printed on the Integration Host’s own receipt printer uses its own template, also chosen under Local Settings → Printers.

Saving a template does not put it into use. A template that a kitchen station uses cannot be deleted; choose another template for that station first. If a template chosen on a terminal is deleted, the terminal prints the built-in layout instead. After assigning a template, test it on the printer it will use. For recovery steps, see Printers and cash drawer troubleshooting.