Skip to content
FMX EPOS
Download
Help Centre home

Card terminal results and recovery

The terminal’s result decides what you do next. Never repeat a card payment or refund because FMX EPOS lost contact with the terminal.

  • Approved: FMX EPOS adds the payment to the payment list. Check the last four digits and the amount. If the card cleared the balance, the payment completes on its own.
  • Approved for part of the amount (a prepaid card, for example): only the approved amount is added, and the till says “Card approved £… of £…. Take the remaining £….”. Remaining stays above zero. Take only the remaining balance.
  • Card Declined: no payment is added. Ask the customer for another way to pay, or try again only if they agree.
  • Card Payment Cancelled: the payment was cancelled on the terminal or from the till. No payment is added.
  • Card Payment Failed: the request did not complete; for example, it never reached the terminal, or the terminal or Clover reported an error. The message gives the reason. No payment is added. Check the terminal’s status before trying again.

Each result opens in its own window; select OK to close it. Card refunds use the same windows, titled Card Refund Declined, Card Refund Cancelled and Card Refund Failed.

If the result is unknown while the till cannot reach the shared database, Card Payment Result Unknown (or Card Refund Result Unknown) opens instead. Select OK, check the terminal, and answer the result in Cash & Card → Payment Review once the connection returns.

Illustration, not a screenshot. The real screen can differ with the theme or version.

While the terminal is working, Add Card becomes Cancel Card. It shows Cancelling… while it stops the terminal, or Retry Cancel if the cancel needs another try. Cancelling does not prove that no money was taken: a cancel can cross with an approval. Wait for the final result.

If the terminal seems busy, finish or cancel what it is doing and check the result before starting anything else. FMX EPOS refuses a new card request while one is still active: “A card transaction is still active. Finish or cancel it and check its result first.” While an earlier card result for the same order is still unknown, another card payment or refund on that order is refused with “A previous card result is still unknown. Confirm it in Payment Review before starting another transaction.” An unknown result anywhere on this till also opens CONFIRM CARD RESULT, which blocks the till until someone answers it; see When FMX EPOS cannot tell what happened.

The terminal may ask whether a payment repeats a recent one. FMX EPOS then shows Possible Duplicate Payment.

  • Select Continue Payment only if this is a new payment.
  • Select Go Back to refuse it on the terminal.

If nobody answers within about 45 seconds, the terminal refuses the payment.

Illustration, not a screenshot. The real screen can differ with the theme or version.

When money may have moved but FMX EPOS cannot tell, it opens the CONFIRM CARD RESULT window. The window shows the transaction, Amount, Started and, if known, the Card. It has no close button.

Illustration, not a screenshot. The real screen can differ with the theme or version.

  1. For a payment, select Check Terminal. If the terminal has a clear answer, FMX EPOS settles the result by itself.
  2. If the answer is still unknown, read the message and check the terminal’s last transaction or receipt. “The terminal has no payment under this reference yet. Read its last transaction, then answer.” does not prove that no money was taken: a payment still in progress has no record yet.
  3. For a payment, select Money Was Taken only when the terminal confirms that it charged the customer. For a refund, select Refund Was Made only when the terminal confirms that it completed the refund and returned the money to the customer’s card.
  4. Select Money Was Not Taken, or Refund Was Not Made for a refund, only when the terminal confirms that it did not go through.
  5. If you cannot check now, select Sign Out.

Signing out does not clear the result. The next time anyone signs in on this till, the window opens again and blocks the till until someone answers it. Once the result is known, any cashier can answer it on this till. An administrator can also settle it in Back Office → Orders → Payment Review.

Check Terminal works only for payments this till sent to the terminal; it cannot look up a refund. For a refund, check the terminal’s transaction history, the merchant receipt or other merchant records before answering.

Money Was Taken and Refund Was Made record the card movement as successful: the payment was charged, or the refund was returned. Money Was Not Taken and Refund Was Not Made record it as unsuccessful. A wrong answer can lead to a duplicate charge or refund, or leave the order out of step with the terminal.

When the unknown result belongs to the payment screen still open, confirming that money was taken puts the approved entry back on that screen. Check the balance and finish with Confirm Payment or Record Payment; knowing the terminal result alone does not complete the order.

If this till stopped in the middle of a payment or refund (for example, FMX EPOS restarted while the payment screen was open), the next attempt on that order opens Payment in Progress or Refund in Progress, marked UNFINISHED ON THIS TERMINAL. It shows the order, start time, reserved amount and any Card Approved amount.

  • Select Take Over to carry on with that payment on this screen. If the terminal had already approved money, taking over adds it back to the payment screen so that Confirm Payment can record it.
  • Select Release only when no approved card money is waiting to be recorded. It frees the order without recording any money.
  • Select Go Back to leave the order as it is, without taking money or releasing it.

Release is unavailable while approved card money is still outstanding, or while a card machine refund is not yet recorded. For a refund, submit the refund again after Take Over or Release.

If the unfinished operation includes reserved points, Take Over restores those points entries on the payment screen. Release frees the order and returns the reserved points. Check the restored entries and balance before adding a replacement payment.

On a table, recovered payments wait on the payment screen with the note that no new card charge will be made. Choose By Amount or By Items / Seats if asked, select the items or seat they paid for, and select Apply Recovered Payments. If they are more than the share and tips are turned on, Recovered Payment Includes a Tip asks whether to record the excess as a tip: select Apply Payments to agree. With tips turned off, select more items, or refund the card payment and collect the correct amount again.

Illustration, not a screenshot. The real screen can differ with the theme or version.

If another till has the order reserved, FMX EPOS says “This order has a payment or refund in progress on terminal …. Check it there before taking more money.” Check the payment on that till first. If that till cannot be used, an administrator can settle it in Back Office → Orders → Payment Review: Reconcile releases the operation once its card result is settled, and Move to This Terminal moves the approved card money of a table, or of a held order when it is more than the held balance, to the administrator’s till.

Tips, cashback and receipts on the Clover Flex

Section titled “Tips, cashback and receipts on the Clover Flex”

FMX EPOS sends every card payment to the Clover Flex with the same settings, whatever the Clover dashboard is set to:

  • The Flex does not ask for a tip. Add any tip on the till before Add Card; see Tips and split payments.
  • The Flex offers no cashback.
  • The Flex does not take payments offline. Without its own connection it declines the card rather than storing the payment to send later. If it approves a payment offline anyway, FMX EPOS treats the result as unknown: check the Clover transaction history, then answer CONFIRM CARD RESULT.
  • The Flex does not print receipts or offer a receipt choice. Order refund slips and manual card slips print on this till’s receipt printer. To print the slip for an order’s card payment, use Card Receipt on that payment in Orders.

While the Clover Flex needs attention, the till shows a CARD TERMINAL warning with the pairing steps and Reconnect. If you minimised it, open Cash & Card → Card Terminal: the status panel there shows the Clover Flex status, and Connection Guide brings the warning back. On the payment and refund screens the warning is folded into the warning triangle with the till’s other warnings; tap the triangle, or Connection Guide on the payment screen, to open it. For pairing and network faults, see Clover and card terminal troubleshooting. If the Clover Flex cannot be used, Clover Flex Not Ready offers Retry Terminal, or recording the transaction from a separate card machine. Complete it on that machine first, then choose Record External Payment or Record External Refund. FMX EPOS does not move any money this way.

The Clover Flex connection runs only while Use Clover Terminal is ticked in Back Office → Local Settings → Caller ID & Clover on this till. If Recent Errors in Back Office → Diagnostics says that Clover needs .NET Framework 4.8.1, install it and restart Windows; Clover then starts by itself. The till keeps trading meanwhile, and card payments can be recorded from a separate card machine.

Check the order’s payment list, the amount paid and the remaining balance. If a warning badge remains, open Cash & Card → Payment Review and select Refresh. Do not end the trading day with a result still unresolved: the Z report is refused until it is dealt with.