Skip to content
FMX EPOS
Download
Help Centre home

Online orders and platforms

Online orders appear under Orders → Online. Platforms shows how each connected service is running today. The actions you see depend on the provider, the payment state and the order status.

Website orders (shown as Website on the till) and marketplace orders (Just Eat and Uber Eats) follow different money rules. Read the provider name and payment label before you accept, change or refund an order.

The Integration Host is the one till that fetches orders from connected platforms, sends your platform settings and releases scheduled orders to the kitchen. If no till is acting as the Integration Host, every till shows No Integration Host is running. Orders are not fetched, platform settings are not sent and scheduled orders are not released. A closed Just Eat service also stays closed past your business-day cut-off, and the tills keep showing services as closed. A closed Uber Eats service reopens on Uber’s side when its closure ends.

  1. Read the warnings on the till. A connection that keeps failing shows a corner warning naming the platform, for example “Just Eat polling failing. Check Online Platforms”. A platform with polling off, or with deliveries or collections closed or paused, is not shown as a corner warning: the Platforms button in the left rail shows an amber number instead, and the Platforms workspace shows which platform and why.
  2. Open Platforms. Every till shows each connection with its Polling switch and when it last checked for orders. After failed checks, a red line such as “3 failures in a row: …” appears; tap it to read the full error.
  3. Check whether Delivery and Collection are open or closed before you promise a customer anything.

New-order pop-ups and sounds appear only on the Integration Host, so keep it where staff can see and hear it. The pop-up names the platform and order number, says Order accepted automatically where that applies, and counts further arrivals. Select View Order to open it, or Acknowledge to close the pop-up. While the Integration Host is locked, its PIN screen shows a read-only notice with the same sound, ending with “Sign in to view and handle orders.” Every till shows a banner such as 2 Online Orders Need Attention, and a short message when an order is accepted automatically.

Illustration, not a screenshot. The real screen can differ with the theme or version.

Moving the Integration Host to another till or changing platform connections is a job for an administrator; see Online platforms.

The Polling switch is on every till. Turning it off asks Stop … Polling? and warns that the platform keeps taking orders but this till will not receive them; select Stop Polling to confirm. While it is Off, no orders from that platform reach FMX EPOS, even though customers may still be ordering on the platform. Turn it off only when your shop has decided to stop taking that platform’s orders, and close the platform’s services too.

A staff cashier may need a manager’s PIN to change the Polling switch or any platform setting below, and to use Sync Now.

The settings controls appear only on the Integration Host. Other tills say which terminal manages them, and the website connection’s card (its title is the connection’s Display Name, Website by default) reads “Managed on the Integration Host.”

Illustration, not a screenshot. The real screen can differ with the theme or version.

  • Delivery and Collection on a Just Eat card or the website card open or close that service. Uber Eats works differently; see Close Uber Eats. Close All Deliveries and Close All Collections (or Open All …) change every platform at once. Just Eat and Uber Eats need saved hours for the service before it can be closed. The FMX Website switches can close a service without saved hours.
  • Closing a Just Eat or Uber Eats service lasts until your next business-day cut-off. The Integration Host then opens it again with your normal hours, so a closure for the rest of the day does not need to be undone the next morning. While it lasts, every till counts it in the amber number on the Platforms button.
  • To stop a Just Eat or Uber Eats card’s orders for a short while, for example on a busy evening, select 15 min, 30 min or 60 min beside Pause. Delivery and collection close until then, and the Integration Host opens them again when the time is up. The card shows when, for example “Closed until 19:45”, with the day and date if it is not today. Pausing again sets a new end, but never shortens a closure that already lasts longer. While a service is paused, Close beside the pause buttons closes it until the cut-off instead, and opening its Delivery or Collection switch ends the pause.
  • Lead Times sets the delivery and collection lead times, from 5 to 180 minutes. Type the minutes, or use − and + to change them by 5, then select Save Lead Times.
  • Trading Hours holds the week’s opening hours. Select Edit Hours, set the opening periods for Delivery and Collection (an end before the start is the next morning), optionally use Repeat Monday Hours, then select Save Hours.
  • On a Just Eat card, set the Delivery radius and select Save Radius.
  • Changes go to the platforms automatically; the till shows “Saved · pushing to platforms…” until they have been checked. Sync Now checks every platform at once and puts right any differences. Each card’s status reads In Sync, Differences, Failed or Not Synced.

Uber Eats has a single switch for the whole store, so the Delivery and Collection buttons on its card do not act separately. Which one pauses the store depends on who delivers, chosen beside Delivery at the bottom of the card.

Illustration, not a screenshot. The real screen can differ with the theme or version.

  1. On the Uber Eats card, check the delivery choice: Uber couriers, Own staff or Own staff + Uber. Until one is chosen, the card says “Set a delivery mode to control the store switch.”
  2. Close the button that controls the store:
    • Uber couriers: close Collection. This pauses the whole Uber Eats store, deliveries included. Closing Delivery does nothing on Uber Eats, and the card still reads In Sync.
    • Own staff: close Delivery. This pauses the whole store.
    • Own staff + Uber: closing either button pauses the whole store.
  3. Check the amber number on the Platforms button in the left rail, which counts the closure. The Platforms workspace shows which platform is closed and why.

To open the store again, open the same button.

On the Integration Host, the website card shows whether the till is connected to FMX EPOS Cloud, with its own controls:

  • Table QR and In-Store QR open or close ordering from table and counter QR codes.
  • Pause website stops new website orders for 15 min, 30 min or 60 min. The card then shows “Website paused until …” with End Pause.
  • Ordering Settings sets the delivery minimum and, for each channel, whether orders are accepted automatically, how many minutes staff have to accept them and which menus are offered. Select Save Ordering Settings.

Illustration, not a screenshot. The real screen can differ with the theme or version.

  1. Open Orders → Online and select the pending website order.
  2. Check the customer, telephone, address, items, notes, total, payment and requested time.
  3. For collection or delivery, choose On Time, +10 min, +20 min or +30 min, then select Confirm & Print. An in-store takeaway has Confirm instead, because it needs no time.
  4. To turn the order down, select Reject. You can type a reason, which is passed to the customer, then select Confirm Rejection.

Illustration, not a screenshot. The real screen can differ with the theme or version.

If something in the order has been marked sold out since the customer ordered, the order shows Sold Out with, for example, “Sold out now: Cheesecake. Check with the customer before accepting, or reject the order.” Such an order is never accepted automatically; it waits for staff.

An order paid by card on the website shows Authorised Online while it waits: the money is held but not yet taken. It is taken when you accept the order, and the payment then reads Paid Online. If you reject the order, or nobody accepts it within the time your shop allows (five minutes unless changed), the customer is told it was not accepted and is not charged. If money was taken or refunded in the Stripe dashboard before you answer, the order shows that instead: Paid Online, Part Paid Online £…, Partially Refunded or Refunded.

Sometimes the till answers “The online payment is being taken. The order comes through once it is taken.” Wait: the order appears once the payment has been taken. Do not accept it again or start the food before then. If the payment cannot be taken, the till says “The online payment could not be taken, so the order is cancelled. The customer has been told.”

Some customer orders are accepted automatically. A customer order placed from a table’s QR code appears above that table’s basket. Check it, then select Add Order or Add & Send. After Reject, select Confirm Rejection. An accepted table order that is not added to the bill within 10 minutes is dropped and never reaches the bill, so deal with table orders promptly.

Illustration, not a screenshot. The real screen can differ with the theme or version.

Website orders do not include an allergy chosen by staff. Treat any request the customer typed as a note and follow your allergy procedure; the website gives no allergy guarantee.

  1. Select the Just Eat or Uber Eats order.
  2. Compare the order number, service type, promised time, items, charges, discounts, total and payment state with the provider details shown.
  3. When the order is ready to go into your workflow, select Confirm & Print.
  4. For an Uber Eats order, select Mark Ready when the food is ready. It appears once the order is accepted and goes once it has been sent.

Confirm & Print does different things on each platform:

  • Just Eat: accept or reject the order on Just Eat itself. Confirm & Print only brings the order into FMX EPOS and prints it; it does not tell Just Eat anything. FMX EPOS has no Reject for Just Eat orders.
  • Uber Eats: Confirm & Print accepts the order on Uber Eats, with the preparation time set for your store on Uber Eats. To turn an order down or change its time, use Uber Eats. An order that is scheduled or has been changed on Uber Eats is refused with “This order was scheduled or updated. Check it in Uber Eats, then try again.” A scheduled Uber Eats order appears in FMX EPOS only once Uber Eats releases it for preparation.

A Just Eat order that reaches FMX EPOS more than 12 hours after its expected time is recorded as a past order, without printing or an alert. An order first seen more than 24 hours after its expected time, for example after a long outage, is stored as archived. It makes no till order and is not in your reports.

If acceptance fails, the order stays in the list with the reason: “Automatic acceptance failed: …” when FMX EPOS was accepting it by itself, or “Acceptance failed: …” when a person accepted it. Deal with the reason, then select Confirm & Print again. FMX EPOS does not retry it by itself. An Uber Eats order can still be accepted automatically when Uber Eats updates it.

An action may say “The Integration Host has not confirmed this request yet…”. The Integration Host finishes it and the order appears in the list; refresh the order to see the provider’s reply, and do not keep selecting the action while you wait.

For an accepted scheduled order, Print Now releases it to the kitchen before it is due; otherwise your shop’s kitchen release rule releases it. Retry Printing is for a release that is known to have failed. Check the original printer before retrying, because it may print a duplicate. Neither works on a cancelled or refunded order: the till says “This order was cancelled or refunded, so it is not sent to the kitchen.”

Unmatched items and orders held for review

Section titled “Unmatched items and orders held for review”
  • If an order contains an item that is not matched to a till product, Confirm & Print is unavailable and Accept as Sent is offered instead. This accepts the order with the item names and amounts exactly as the provider sent them. Ask an administrator to match the item so future orders accept normally.
  • FMX EPOS holds an order for review when it cannot read the provider’s data safely, for example when the platform did not say how the order was paid, or gave a discount larger than the food and delivery fee together. The order shows Needs Attention with the reason, such as “The platform order could not be read in full: …”, and cannot be accepted in FMX EPOS. A website order held for review can only be rejected, so that the customer gets an answer.
  • If your shop has set it, an ASAP order that arrives after its expected time shows Needs Attention with “The expected time has passed. Check with the platform before accepting.” It is not accepted automatically. Check with the platform, then select Confirm & Print if the order still stands. If it no longer stands and it shows Paid on Platform, an administrator archives it in Back Office → Orders → Online Inbox.

Illustration, not a screenshot. The real screen can differ with the theme or version.

To deal with a marketplace order that cannot be accepted:

  1. Read the original order on the platform (the Just Eat or Uber Eats tablet or website). Accept or reject it there.
  2. If the order shows Paid on Platform and the food still has to be made, enter it with Enter by Hand, as described below. It then counts as a platform order paid on the platform.
  3. Otherwise archive it in FMX EPOS: on the till, select Archive Unpaid Order, then Confirm Archive. An order that shows Paid on Platform does not offer it: an administrator archives that order in Back Office → Orders → Online Inbox, which closes Enter by Hand for good and keeps its sale out of your reports. Archiving does not cancel the order on the platform. If the food still has to be made, enter the order on the till as a normal order.

Do not record a platform’s payment as cash or card. For a Pay at Handover order, take the payment at handover as usual. An order entered as a normal order counts in the shop’s own sales, not the platform’s, and it stops the Z report while it is unpaid. See also An order that cannot be accepted.

Do not guess at missing products or recalculate a marketplace total. Record the amounts exactly as the provider reports them.

Enter by Hand appears on a Just Eat or Uber Eats order that is held for review and was paid on the platform. An Uber Eats order that FMX EPOS could not read counts as paid on the platform, with its delivery or collection type, because the connection imports only orders paid through Uber Eats. If its type cannot be read either, its payment stays unknown and Enter by Hand does not appear.

  1. Close any open table, then select the order in Orders → Online and select Enter by Hand. If the basket already has items, Replace Current Order? asks before discarding them: select Discard & Enter.
  2. The basket takes the order’s type, customer, address and note, and a banner above it reads “Entering … by hand · set the platform’s prices”. Add the items the platform order lists.
  3. Set each line to the price on the platform order: open the line and change its Price per Item (see Use the product editor). Leave out bag fees, members and coupons; the platform’s fees are part of its total. The till takes no discounts while you enter the order.
  4. Select Paid on Platform, which takes the place of Pay. Check Total, the amount the platform took, and Tip against the platform order; both are filled in from what FMX EPOS could read. Tap either one to change it on the keypad. Items shows the basket total.
  5. Select Record Payment. The till says, for example, “Just Eat order 7731 recorded as EPOS order #14, paid on the platform.”

The order then counts as a platform order paid on the platform: it is not in the shop’s cash, card or staff tips, and anything above the items and tip counts as platform fees. It prints as an accepted platform order does. A total below the items and tip is refused with “The platform total £… is less than the items and tip £…. Check the line prices first.”

While you enter the order, Hold, the order type, the customer and the ready time cannot be changed. Stop on the banner discards what you entered, and the platform order stays held for review. An Uber Eats order shows Not Accepted on Uber Eats: accept it on Uber Eats yourself, because entering it here does not tell Uber. Changing a price can need a manager’s PIN, as any price change can.

The total received from a marketplace is fixed. FMX EPOS does not apply local line discounts, order discounts, member free items, member percentage discounts, coupons or points to it, and it does not create local products or customer records from platform data.

Website collection and delivery orders are fixed in the same way, so the till cannot change an amount already agreed online.

The order list and the order’s Payment box show how it is paid: Paid on Platform, Paid Online, Authorised Online, Pay at Handover, Part Paid Online, Refunded or Partially Refunded. An order paid for less than its total shows Balance Due £… in the list.

  • A prepaid marketplace order is recorded with its platform payment. Do not take payment from the customer again at handover.
  • A Pay at Handover order keeps its balance due in FMX EPOS. When the customer collects or receives it, use Record Payment and take cash or card.
  • A website order paid by card online can be refunded online from FMX EPOS. See Refunds.
  • FMX EPOS neither imports nor carries out Just Eat or Uber Eats refunds. Process the refund on the platform and keep the record there.

Cancelling an order and giving money back are separate actions. A cancellation from the provider shows Platform Cancelled and may need Acknowledge Cancellation in FMX EPOS, but that does not prove a refund has been made.

When the platform cancels an order, FMX EPOS cancels the till order too, as long as the till holds no money on it: the order was paid on the platform, has not been paid at all (an unpaid Pay at Handover order), or every payment taken at the till has been given back. If the till still holds money on the order, the order still has a Refunded or Partially Refunded status, or a payment is in progress, the till order stays as it is for staff to settle: give back any money the till took (see Refunds), then select Acknowledge Cancellation.

Select Archive Unpaid Order, then Confirm Archive. It is offered only for marketplace orders that can leave the active list without changing any money recorded in FMX EPOS: an unpaid Pay at Handover order, or an order that could not be read in full and was not paid on the platform. Archiving keeps the history and cancels any linked unpaid till order, so it can no longer take payment. That cancellation follows the Cancel Unpaid Order permission, so a staff cashier may need a manager’s PIN. Archiving does not cancel the order with the provider, refund the customer or tell the kitchen to stop. Do those things separately before you archive. While Uber Eats has not yet answered a request for the order, archiving is refused; refresh the order and try again.

Illustration, not a screenshot. The real screen can differ with the theme or version.