Use an AI assistant day to day
Once an assistant is connected (see Connect an AI assistant), you ask it in ordinary words. It looks things up in FMX EPOS Cloud and makes changes as you, within the stores and access its connection was given. The examples below use an invented business with two stores, Harbour Kitchen and Harbour Kitchen Westgate.
How to ask
Section titled “How to ask”- Name the store. If the connection has several stores and you do not say which, the assistant may ask, or answer for all of them.
- Give the dates. “Last week” or “yesterday” is fine, but for a report you will keep, give the exact dates.
- For a change, ask to see it first, for example “show me the changes before you publish”. Then say yes or no.
- Ask for one change at a time when it matters. Several changes in one request are harder to check.
- If the answer looks wrong, ask where the figure came from, or open the same page in Cloud.
The assistant works from the same data as the Cloud pages. Sales reports and till order searches use the store’s business dates, money is in pounds including VAT, and figures are as the store last synced.
Look things up
Section titled “Look things up”Sales reports and comparisons
Section titled “Sales reports and comparisons”Examples:
- “What were Harbour Kitchen’s sales yesterday?”
- “Compare last week with the week before at both stores, day by day.”
- “How much VAT did Harbour Kitchen Westgate take in September?”
The assistant reads the same sales report as the store’s Reports page, over business dates. A business day starts at the store’s Cut-off Time (Business Day Starts in Cloud’s Sales Settings), so an order taken after midnight can belong to the day before. The store’s own sales (till orders, its own website and manual card payments) make up the totals. Just Eat, Uber Eats and other platform orders are reported in a section of their own and are not added to those totals.
Figures are as the store last synced, so the latest orders may not be there yet. Ask “when did Harbour Kitchen last sync?” to see when the store last reported, today’s business date, today’s sales so far and its open orders. While a store is uploading its history again, the assistant tells you how far the upload has got and that figures may be incomplete until it finishes.
Orders and platform orders
Section titled “Orders and platform orders”Examples:
- “Find order 1042 at Harbour Kitchen and show its payments.”
- “List yesterday’s refunded orders at Harbour Kitchen.”
- “Show today’s Uber Eats orders at Harbour Kitchen Westgate.”
The assistant can search till orders over business dates, open one order with its lines, payments and refunds, and list platform orders over dates. Without Customer Personal Data, customer names show as “(hidden)” and orders can be found by order number only.
Live status
Section titled “Live status”Ask “Are the tills at Harbour Kitchen online?” The assistant shows each till, kitchen screen and online platform as it last reported, with the time. A status is only as fresh as the store’s last report.
Calls and customers
Section titled “Calls and customers”With Customer Personal Data, you can ask:
- “How many calls did Harbour Kitchen miss on Saturday?”
- “Find the customer with telephone 07700 900123 and show their last orders.”
- “Is Jo Martin a member at Harbour Kitchen Westgate?”
The assistant can list calls with how many were answered and missed, search customers with their membership, and open one customer with their addresses, membership subscriptions and orders. Without that area it cannot read customers or calls at all.
Menus, settings and other records
Section titled “Menus, settings and other records”With View, the assistant can also read the menus and their versions, sold-out items, coupons, membership plans, staff (never their PINs), shop details, order rules and tips, the restaurant set-up, platform mapping, online ordering, websites and QR codes. It can list your stores with their licence end date, tills and modules, and a store’s managers. With Integrations, it can tell you whether Stripe is set up, never its keys.
Bookings
Section titled “Bookings”With Restaurant Bookings, you can ask:
- “Show tonight’s bookings at Harbour Kitchen.”
- “Which booking requests are waiting for approval?”
- “Is there a table for 6 at Harbour Kitchen on Saturday evening?”
The assistant can list a store’s bookings from one business date to at most 31 days later, open one booking with any change the guest asked for online, read the booking settings and find the start times a party fits. It finds times as staff book on the Cloud Bookings page, so the website’s own limits, such as the largest party online, do not apply. Without Customer Personal Data, guests’ names, telephone numbers, email addresses and notes read “(hidden)”.
This works only at a store whose bookings Cloud confirms. When the store’s till confirms them, the assistant says so: use Tables → Bookings on the till instead. See Configure bookings.
How-to questions
Section titled “How-to questions”Ask “How do I refund part of an order?” or “Why is my kitchen printer not printing?” The assistant searches this help centre, in any of its seven languages, answers from the article and gives you its link. The articles keep the product’s English button names, so you can follow its answer on the till or in Cloud.
Make changes
Section titled “Make changes”Before any change
Section titled “Before any change”Changes need View and Change for the area. They follow the same rules as the Cloud pages and are recorded in the store’s Reports → Audit under your name, in the same way as your own changes; the audit does not mark them as made by an assistant. Changes to an Owner’s website for all stores belong to no single store, so they do not appear in any store’s audit.
Each assistant asks for approval in its own way. Most ask before a change that overwrites or removes something, such as a menu edit or a sold-out change, but some create something new, such as a coupon batch, without asking. In Claude you can choose to always allow a tool, and it then stops asking. Ask the assistant to show you its plan before it makes a change.
If someone changed the same record after the assistant read it, the change is refused. The assistant reads the record again and can show you what is there now before it tries again.
Changes to the till’s records wait for the store, as they do from the Cloud pages: settings, staff, membership plans, platform mapping, sold out, in-store coupons, opening or closing collection and delivery, lead times and new table QR codes. The store picks the change up at its next sync and applies or refuses it. Ask “Has Harbour Kitchen applied it?” and the assistant tells you whether the change is still waiting, was applied, or was refused with the store’s reason.
Change the menu
Section titled “Change the menu”The assistant edits the store’s menu draft, the same draft as the Menus page in Cloud. Nothing reaches the tills until the draft is published.
- Ask for the change, for example “At Harbour Kitchen, raise Cod Bites by 50p and show me the change before publishing.”
- The assistant saves the change to the draft. It can add categories, products and meal deals, and change categories, products (prices, VAT rates, names, descriptions, availability, categories and option groups), options, a product’s own option prices and a meal deal’s choices. It cannot add new options. It never deletes a category, product or option: it makes it inactive instead. A change to a meal deal’s choices replaces all of them, so a choice or item it leaves out is removed from the draft.
- Ask it to show every change in the draft. It lists each product or option with the value before and after.
- Check the list. It shows everything in the draft, including changes someone else made on the Menus page.
- Say “publish it” or “discard the draft”.
Publishing publishes the whole draft as the store’s next menu version. The tills apply it at their next sync, and the website then shows it. Discarding throws the whole draft away, including other people’s changes in it. If the draft or the latest version changed after the assistant showed you the changes, publishing is refused and the assistant shows what differs, so you can check again. It publishes over a newer version only if you tell it to.
Sold out
Section titled “Sold out”Examples:
- “Mark Cheesecake sold out for the rest of today at Harbour Kitchen.”
- “Put Fishcake back on sale at both stores.”
The assistant can mark products and options sold out, or back on sale, at one store or several. A change for the rest of today ends at the next business day. Each store is done on its own, so a refusal at one store leaves the others done. Ask whether each store has applied it before you tell staff or customers. A store applies it at its next sync, which needs one of its tills to be online.
If the assistant loses an answer and sends the same sold-out change again, the change is still made only once at each store. A new request from you counts as a new change, so after a lost answer ask the assistant whether each store has the change before you ask for it again.
Coupons
Section titled “Coupons”Example: “Create 20 single-use online coupons at Harbour Kitchen for 10% off, with a £20 minimum spend, valid until the end of January.”
The assistant can create a batch of new codes at one or more stores, with a code prefix, how many, online or in-store, what they apply to, the discount, the minimum spend, the dates, how many uses and whether they can be combined. Online coupons work on the website at once. In-store coupons work once each store has them. It can also change one coupon’s minimum spend, dates, uses, stacking and whether it is active. If the assistant loses an answer and sends the same batch request again, it does not make a second batch. If you are not sure whether a batch was made, ask the assistant to list the store’s coupons before you ask for the batch again.
Shop details, order rules and tips
Section titled “Shop details, order rules and tips”The assistant can change the shop details (till title, address, telephone, website, VAT number and whether the store is VAT registered), the order rules (when the business day starts, bag fee, held order expiry, reasons and auto lock) and whether the tills take tips with their presets. Only an Owner’s connection can change order rules. Moving the start of the business day (Cut-off Time) changes which day later orders count towards in reports and online ordering, so check that change carefully. The store carries out each change at its next sync.
Example: “Make Sam a manager at Harbour Kitchen.”
The assistant can rename a till staff account, make it active or inactive, or make a cashier a manager or a cashier again. It never sees or changes PINs, and it cannot add or delete a staff account. Use Add Staff Account and Delete on the Cloud Staff page, and set PINs there.
Make and change bookings
Section titled “Make and change bookings”Examples:
- “Book a table for 4 at Harbour Kitchen on Friday at 19:30 for Jo Martin, telephone 07700 900123.”
- “Move the Martin booking on Friday to 20:00.”
- “Approve tomorrow’s booking request for 8 guests.”
- “Cancel the Reed booking tonight. They rang to say they cannot come.”
With View and Change for Restaurant Bookings, the assistant can make a booking, change a pending, confirmed or arrived booking, approve or reject a booking request or a change a guest asked for online, cancel a booking, and mark a confirmed booking arrived or a no-show on its day or later. It can also change the store’s booking settings. To make a booking, or to change a guest’s name, telephone, email or linked customer, it also needs View and Change for Customer Personal Data. The store needs the Restaurant Booking add-on for any of these changes.
Cloud confirms these changes straight away, as on the Bookings page (see Manage bookings in Cloud). A booking that has an email address gets an email about it. If a time is past a table’s guest range, past the arrival slot’s guest limit, or overlaps another booking, the assistant should tell you and ask before it books anyway; an overlap also needs a reason. A booking someone changed after the assistant read it is refused, and the assistant reads it again.
Changing a request that is awaiting approval confirms it, so ask the assistant to approve or reject it instead unless that is what you want.
The assistant cannot seat a booking or confirm a departure: do those on a till or the host stand.
A change to the booking settings is refused if existing bookings would no longer fit, or if someone changed the settings after the assistant read them. The store’s till takes the new settings at its next sync.
If the assistant loses an answer and sends the same booking again, the booking is still made only once.
Membership plans
Section titled “Membership plans”Through an Owner’s connection, the assistant can change a membership plan’s name, prices, order discount or whether it is active. Wait for the store to apply the change before you sell or advertise it.
Platform mapping
Section titled “Platform mapping”Example: “Map the Just Eat item ‘Cod Bites (6)’ to our Cod Bites.”
The assistant can map a platform’s menu item to one of your products, or say what to do with a platform modifier: print its text, ignore it or replace it with a product. The store checks the mapping against its own menus at its next sync.
Online ordering and websites
Section titled “Online ordering and websites”Examples:
- “Close delivery at Harbour Kitchen Westgate.”
- “Set collection lead time to 25 minutes.”
- “Change the website’s tagline to ‘Fresh fish since 1998’.”
The assistant can open or close collection and delivery and change their lead times; the store carries these out at its next sync. Through an Owner’s connection, it can change a website’s name, tagline and contact details, or turn the website on or off. A Store Manager’s connection can change only how their store’s website looks: colours, fonts and layout, which must keep text readable. Website changes show at once. The delivery fee rules on the Online Ordering page still decide where the website delivers.
QR codes
Section titled “QR codes”The assistant can list the store’s table QR codes and the in-store QR code, show one as a picture and give you links to download them. The links open in a browser signed in to FMX EPOS Cloud. There are codes only when an enabled website shows the store and the store has active tables. It can also replace a code:
- A new table QR code takes effect once the store has synced, and the printed code then stops working. Only an Owner’s connection can do this.
- A new in-store QR code takes effect at once, and the printed one stops working.
Print the new code straight away. You can also download it on the Online Ordering page (see Table QR codes).
Store managers
Section titled “Store managers”The assistant can list a store’s managers. Through an Owner’s connection, it can also add someone as a manager of one or more stores, or remove them from a store. A new email address gets an invitation; an existing Store Manager is told the stores by email. Removing a manager from a store keeps their account and their other stores.
Product pictures
Section titled “Product pictures”You can attach a picture in the chat and ask, for example, “Use this as the picture for Battered Sausage on the website.” The picture can be PNG, JPEG or WebP, up to 8 MB, cut to a square or shown whole. It shows on the website at once, without publishing the menu. The assistant can also remove a product’s picture. ChatGPT passes an attached picture on to FMX EPOS. Other assistants may not, and then you add the picture on the Menus page.
What an assistant cannot do
Section titled “What an assistant cannot do”An assistant cannot:
- take payments, refund orders or review online payments;
- claim, release or delete a store;
- connect Stripe or finish its onboarding;
- create a website, change its web address, logo, banner or pages, or add custom domains;
- change delivery fees, opening hours or customer messages;
- add options or new membership plans, or change customers or their points;
- change areas, tables or courses;
- seat a booking, confirm a departure or hand bookings over between the till and Cloud;
- add or delete staff accounts, change passwords or staff PINs, or see keys and login details.
Do these on the Cloud pages or the till.
Good habits
Section titled “Good habits”- Ask to see the changes before a menu is published, and read the whole list.
- Check which stores a change covers, especially sold out and coupons at several stores.
- Check that the till has applied a change before you rely on it.
- Give the connection only the stores and areas you use it for. You can change this at any time on AI Connections.
- Give Customer Personal Data only if you need the assistant to work with customers’ details.
- An assistant can misread a request. If a figure or a change looks wrong, check it on the Cloud page.